⛵ INTERNATIONAL DELIVERY
♻ RETURNS UNDER 100 DAYS
⭐⭐⭐ CUSTOMER REVIEW 4.8/5
✉ CUSTOMER SERVICE
English
  • Français
  • Espagnol
  • Italien
Image Connexion / Inscription

Captain Tolley's

Captain Tolley's Anti-Leak Sealant is a high quality product designed to repair and seal cracks in a variety of materials such as polyester, plastic or ceramic. Unlike many boat sealants, Creeping Crack Cure Captain Tolley anti-leak sealant is made from a water base, which makes it makes non-toxic and can be painted once dry.

HOW TO APPLY CAPTAIN TOLLEY'S ANTI-LEAK SEALANT 60ML?

By following the steps below, you can make an effective, long-lasting repair using our anti-leak sealant.

Preparation area: Before applying the anti-leak sealant, make sure the crack you want to repair is approximately 1mm wide and as dry as possible. If you carry out the repair outdoors, check that the weather conditions are favorable, without frost or rain, and that the temperature is at least 7°C.

Application: Apply Captain Tolley's Anti-Leak Sealant sparingly from the bottle. You can apply it every 30 minutes until the crack is completely filled. If the product is absorbed quickly into the crack, this may indicate a significant leak. So be careful that the putty does not flow over the edges of the crack or to the other side.

Drying Time: Once the crack is filled, wait at least 24 hours to allow the Creeping Crack Cure Stop Leak Sealant to fully cure. After this time, check if the leak has been blocked. If necessary, you can apply a new coat of putty to finalize the repair. Keep in mind that curing times may vary depending on weather conditions.

CAPTAIN TOLLEY ANTI-LEAK SEALANT ON NAUTISPORTS

Ideal for sealing boat decks and camper van roofs, this anti-leak sealant effectively prevents any water leaks. Its unique liquid formula allows it to penetrate even damaged seals on portholes and deck hatches, providing a reliable and reliable boat repair solution. sustainable.

Open filters

1 Item

per page
Set Descending Direction
Open filters

1 Item

per page
Set Descending Direction