Boat lacquer: choosing and applying marine lacquer
→ How to choose your boat lacquer ?
To choose your or your marine lacquer, you need to take into account the type of hull you have: if your boat is wooden, favor single-component marine lacquers (ease of application) even if they can serve well for other types of boats. If you have a hull other than wood, two-component lacquers are recommended (more difficult to apply, but a quality finish).
Marine lacquers restore color to your hull and protect it from external aggression. Boat paint is an effective protection against UV rays, rain, abrasion, etc. The is applied to the exposed parts of your boat, i. e. above the waterline.
There are many brands, categories and shades, such as white marine lacquer. This guide will help you decide which boat paint is right for you.
→ How to apply marine lacquer
Applying marine lacquer is similar to applying antifouling paint. To apply your marine lacquer correctly, follow the steps below:
-
Equip yourself properly with at least gloves, mask, goggles and overalls.
-
Check the hull for areas where old paint is peeling off or signs of cracking, and remove them with a scraper to make the finish as clean and smooth as possible. If necessary, sand the surface.
-
If imperfections or irregularities appear, fill them with putty to fill any holes.
-
Rinse the hull with fresh water and allow to dry completely.
-
Delineate the waterline and apply tape along its length to apply the paint above the waterline.
-
Check the compatibility of your old marine lacquer with the new one.
For compatible lacquers, you can apply a single-component marine lacquer or a two-component marine lacquer over an old single-component paint. For non-compatible lacquers: it is not possible to apply a single-component lacquer over an old single-component lacquer.
-
If your marine lacquer is compatible, it can be applied over the old one.
-
If it is not compatible, use an undercoat to facilitate adhesion of the new lacquer. Lightly sand the undercoat before applying the paint.
-
Homogenize the paint by mixing thoroughly.
-
Apply the marine paint with a spray gun, roller or brush according to your preferences and the application instructions for your boat paint. Cross-coat and apply 1 to 3 coats as required
Boat lacquer: choose the right moment !
An essential tip when applying marine lacquer paint is to always work under optimum conditions to avoid finish defects.
Apply lacquer in dry weather, with temperatures between 15 and 25°C and low humidity, to avoid dripping, bubbling or drying too quickly.
→ Beautify your surfaces with single-component marine lacquer !
It's an easy-to-use boat lacquer paint used mainly on wood. It dries in the standard way, i. e. by evaporation of the solvent. The offers a supple finish.
Single-component marine lacquers are ready-to-use paints, ideal for protecting and embellishing wooden, metal or fiberglass boat surfaces.
Easy to apply by brush, roller or spray, they offer excellent resistance to marine conditions (water, salt, UV) and provide a durable, high-gloss finish.
Fast-drying, they can be effectively applied in several coats. Available in a range of colors and finishes, including a gloss finish for hulls and superstructures, they are ideal for both International and International markets.
→ Two-component marine lacquer: fighting abrasion
This is a boat paint that is more difficult to apply and not recommended for wood. It dries by polymerization and offers increased resistance to abrasion in particular.
The } is more resistant and offers a harder, high-quality finish, but is also more difficult to apply.
In this category, two-component boat lacquers offer excellent chemical resistance to UV rays and abrasion, while providing a high-quality gloss finish that can be applied to aluminum, epoxy, carbon, polyester, steel and wood.
→ Adhesion and resistance with bilge paints
The are essential for protecting and maintaining the internal surfaces of boats, exposed to moisture, hydrocarbons and chemical aggression.
Formulated to offer excellent adhesion and high resistance to marine conditions, they provide long-lasting protection against corrosion and mildew.
Available in a range of finishes and colors, our bilge paints not only extend the life of your boat, but also make maintenance easier thanks to their washable surface. Choose professional-quality products for optimum protection of your boat.
→ The best in marine lacquers at Nautisports !
At Nautisports, we offer you a wide choice of finishes from our range enabling you to maintain your craft: lacquer, paint, varnish, antifouling and primer to repaint and protect your boats to best effect.
Find the must-have marine lacquers such as the or International.
Consult the data sheet for each available product for details, compatible substrate, matrix, recommended thinner for preparation, price and don't hesitate to ask our specialists for advice.
