Pneumatic sealing liquid 0.5 L Soromap
€60.00
Ships in 10 days
SKU
SO-74305
Ref. : SO-74305
- For leaks and porosities
- For PVC or hypalon
- Multipurpose use
Need an advice ?
PNEUMATIC SEALING LIQUID 0.5 L SOROMAP: FLEXIBLE SOLUTION FOR LEAKS AND POROSITIES
The Pneumatic sealing liquid 0.5 L Soromap is designed to fill porosities and minor leaks on your inflatable boats. This technical product creates an internal elastic membrane, guaranteeing optimal waterproofing.
The pneumatic sealing liquid 0.5 L Soromap is injected directly inside the PVC or hypalon inflatable structures. Once applied, it is essential to manipulate the tire in different directions to evenly distribute the fluid across the entire interior surface. This coating acts like an emulsion varnish, providing great flexibility and great adhesion strong>, even in difficult conditions.
Suitable for a wide range of floating structures, this product is ideal for inflatable boats, the fenders, the buoys or even drifting dams. It does not requireany prior preparation, except in case of presence of salt inside, where rinsing with water clear is recommended. It is quick to use, with a drying time of 2 hours, allowing your equipment to be put back into service efficiently. span>
Read more
Technical specifications
- Drying time: 2 hours (10 hours for a second coat)
- Use temperature range: between 10°C and 30°C
- Minimum media temperature: 3°C above dew point
- Capacity: 500 ml (enough for a 3 m long inflatable boat)
Upgrade your gear
Write Your Own Review
